Made by Cewo @cewo found at https://www.xxxxx.com/model/285295-makita-track-saw-parallel-guide-extension-set/files

Fix your track saw rails directly to your table with those extension arms directly on your bench dog holes table to cut your pieces!

-- VERY useful if your work piece is smaller than the width or length of your tabletop, you don't need to fix it only on one side with a clamp... you can place it whenever you feel like it!

-- Great also very useful for REPEATED cut like making STRIPS out of one piece... just tighten the arms knobs and place a new piece underneath ! EASY ! ; )

=====

Description from author:

Repeatable rips with the Makita track saw

This fence makes it easy to cut precise strips of exactly the same width when panel cutting.

Two side fences are mounted on the guide rail for this purpose, and the required dimension is set via the adjustable stops.

Large time saving when cutting panel strips, as no more measuring or marking is necessary

For cuts wider than 300 mm, along the width

Tool less mounting on the guide rail

Print settings:

PETG

layer height of 0.3mm should work fine

Hardware:

1x M5x30 Hex head bolt

2x M5x10 Socket head screw

3x M5 Hex nut

1x M4 Hex head bolt

1x M4 Heat-Set inserts for plastic (brass)

2x T-Track 17x10mm, ~800mm, aluminium profile

T-Track or C-Profile

Makita Track Saw Parallel Guide EXTENSION SET

0.2mm layer, 2 walls, 15% infill