MODEL

This is a Modular tool tray for use with the K1 Max D3P riser

Click here to find out more about the D3P riser system for the K1 Max:

K1 Max D3P riser



The model features a tool tray that can mount on either side of the K1 Max D3P riser using the included hooks. The hooks are set for the left side. To use on the right side you will need to mirror the hooks and the main tray.

The tool tray features a main tray with inner compartments allowing up to 3 compartments or one large and one smaller compartments.

You can attach various components to the tool tray using the dovetails attachments on the main tray.

The following components are included:

* A deeper container that can be used to hold hair spray cannister for build plate adhesion;

* A hex tool holder;

* A cutter holder;

* A side tray for storing various items;

* A scraper holder.

You can use the same containers multiple times as all are modular.

This is a great way to have the tool tray and storage you want.

3D PRINTING

PRINT SETTINGS

IMPORTANT: After verification with Creality it appears that there are some issues that need to be resolved with the mobile printing app. At present it seems these may affect slicing and printing of the model. After verification, it was suggested by the Creality Cloud team to use the desktop slicing and printing software. Thank you for your understanding.

IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing.

EACH BUILD PLATE HAS THE TYPE OF SUPPORT REQUIRED INDICATED ON THE BUILD PLATE DESCRIPTION (TREE AUTO, TREE MANUAL OR NO SUPPORT).

I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.

3D PRINT SETTINGS

I use the following settings and materials to print this model:

Infill % : 15% (no need for more)

Nozzle diameter: 0.4 mm

Layer height: 0.2 mm standard

Material: PLA is recommended as its more rigid. PETG or other filaments may cause the part to deform or may not work with the built-in tolerances. PLA-CF and PETG CF and other materials often print too wide and cause parts not to fit.

K1 Max Modular tool tray for K1 Max D3P riser

0.2mm layer, 2 walls, 15% infill