"Fall in 2-bit love, by arts.of.win, with 2 filament changes" by "PPAC"

Slicer : Creality Print v6.0.2.1574 (win)

Printer : Creality Hi (0.4 nozzle, Firmware v1.1.0.36) + CFS (Firmware v1.1.2)

Bed type : Epoxy Resin Plate

Filament(s) :

1 : White, "Hyper PLA @Creality Hi 0.4 nozzle" (Flow ratio : 0.95, Nozzle (First layer : 220°C, Other layers : 220°C), Bed (First layer : 60°C, Other layers : 60°C), Max volumetric speed : 23 mm³/s ).

2 : Orange, "Soleyin Ultra PLA @Creality Hi 0.4 nozzle" (Flow ratio : 0.97, Nozzle (First layer : 220°C, Other layers : 220°C), Bed (First layer : 60°C, Other layers : 60°C), Max volumetric speed : 18 mm³/s ).

3 : Black, "Generic PLA @Creality Hi 0.4 nozzle" (Flow ratio : 0.98, Nozzle (First layer : 220°C, Other layers : 220°C), Bed (First layer : 60°C, Other layers : 60°C), Max volumetric speed : 12 mm³/s ).

Process | Global

0.20mm Standard @Creality Hi 0.4 nozzle

- Quality

- Layer height : 0.2 mm

- First layer height : 0.2 mm

- Seam, Seam position : Aligned

- Strength

- Wall, Wall loops : 2

- Infill, Sparse infill density : 15%

- Support

- Enable support : false ( = unchecked )

- Other

- Bed adhesion

- Brim type : Auto

All file(s) at 100% scale.

Plate 1 :

Mesh(s) : arts.of.win - Fall in 2-bit love - Dist01.stl

// With two filament changes (from white to orange at the start of layer 3, from orange to black at the start of layer 5)

Filament used : Hyper PLA RFID White Creality, Hyper PLA Gold Creality, PLA+ Noir ArianePlast.

Happy printing.

Fall in 2-bit love, by arts.of.win, with 2 filament changes

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill