"Zazu from The Lion King, with 5 filament changes" by "PPAC"

Here the PAUSE is only used to change certain reels during printing, because it is done on a machine with only one CFS.

While two CFS would be needed for more than 4 colors,

knowing the color printing sequence and that there is no reuse of a color,

having a PAUSE allows here, during printing, to manually change two reels in the CFS.

Necessarily, at the time of the PAUSE it is necessary to replace reels that will no longer be used for the rest of the printing, and whose CFS slots has been used twice when assigning the CFS slots to be used for a color at the start of the print.

Slicer : Creality Print v6.0.2.1574 (win)

Printer : Creality Hi (0.4 nozzle, Firmware v1.1.0.36) + CFS (Firmware v1.1.2)

Bed type : Epoxy Resin Plate

Filament(s) :

1 : White, "Hyper PLA @Creality Hi 0.4 nozzle" (Flow ratio : 0.95, Nozzle (First layer : 220°C, Other layers : 220°C), Bed (First layer : 60°C, Other layers : 60°C), Max volumetric speed : 23 mm³/s ).

2 : Light Blue, "Hyper PLA @Creality Hi 0.4 nozzle"

3 : Blue, "Hyper PLA @Creality Hi 0.4 nozzle"

4 : Yellow, "Hyper PLA @Creality Hi 0.4 nozzle"

5 : Orange, "Hyper PLA @Creality Hi 0.4 nozzle"

6 : Black, "Hyper PLA @Creality Hi 0.4 nozzle"

Process | Global

0.20mm Standard @Creality Hi 0.4 nozzle

- Quality

- Layer height : 0.2 mm

- First layer height : 0.2 mm

- Seam, Seam position : Aligned

- Strength

- Wall, Wall loops : 2

- Infill, Sparse infill density : 15%

- Support

- Enable support : false ( = unchecked )

- Other

- Bed adhesion

- Brim type : Auto

All file(s) at 100% scale.

Plate 1 :

Mesh(s) : Zazu_155230_01_px2_2lbyc.stl

// With 5 filament changes (Every two layer) and a pause to change some filament reels in the CFS.

(

From white to light blue filament at the start of layer 3 (Z=0.60 mm),

from light blue to blue a the start of layer 5 (Z=1.00 mm),

from blue to yellow a the start of layer 7 (Z=1.40 mm).

A pause at layer 8 (to change two reels in the CFS)

from yellow to orange a the start of layer 9 (Z=1.80 mm),

from orange to black a the start of layer 11 (Z=2.20 mm).

)

Filament used : Hyper PLA RFID White Creality, PLA Light Blue Velleman, PLA+ Silk Bleu foncé ArianePlast, PLA Yellow Polymaker, PLA Orange Eryone, PLA+ Noir ArianePlast.

Happy printing.

Zazu from The Lion King, with 5 filament changes

0.2mm layer, 2 walls, 15% infill (Paused for one CFS)